Menu
CO2 LASER CUTTING AND ENGRAVING MACHINE
CO Laser Cutting And Engraving Machine Specification
LASER POWER:- 20W, 30W, 50W, 70W, 100W,120W.
WORKING SIZE:- ABOVE ALL SIZES ARE IN CM.
WORKING VOLTAGE :- 230volt AC.
TUBE :- 40W / 50W / 60W / 80W / 100W/130W/150W/180W.
HONEYCOMB, KNIFE TABLE ,
CONTROLLER: M2 BOARD/ RUIDA/TROCEN.
SOFTWARE : CORAL / RD / LASERCAD LENS &.
MIRROR AMERICAN PHOTONICS USA.
MECHANISM :- LINEAR RAIL GUIDE/OUTER.
SLIDE RAIL AMERICAN MODULE GUIDE/INNER.
SLIDE RAIL RACK AND PINNION IN Y AXIS OF 1300 X 2500MM.
WATER PUMP/CHILLER :- CW3000/5000/5200.
AIR COMPRESSOR YUTING – 002/008/009/012.
MOTOR & DRIVER : 42,57, 86KGCM.
WEIGHT: 50KG TO 1000KG BASED ON MODEL.
HIGH SPEED MOTION AND RED BEAM.
POWER METER DISPLAY.
WATER TEMPERATURE DISPLAY.
BLOWER 550W.
CO2 Laser Machine Parts
![1[1]](https://spancnc.com/wp-content/uploads/2024/07/11-3-768x768.png)
![2[1]](https://spancnc.com/wp-content/uploads/2024/07/21-3-768x768.png)
![3[1]](https://spancnc.com/wp-content/uploads/2024/07/31-3-768x768.png)
![4[1]](https://spancnc.com/wp-content/uploads/2024/07/41-3-768x768.png)
![5[1]](https://spancnc.com/wp-content/uploads/2024/07/51-2-768x768.png)
![6[1]](https://spancnc.com/wp-content/uploads/2024/07/61-1-768x768.png)
![7[1]](https://spancnc.com/wp-content/uploads/2024/07/71-1-768x768.png)
![8[1]](https://spancnc.com/wp-content/uploads/2024/07/81-1-768x768.png)
CO2 Laser Machine Parts (300 X 200) mm
![1[1]](https://spancnc.com/wp-content/uploads/2024/07/11-4-768x768.png)
![2[1]](https://spancnc.com/wp-content/uploads/2024/07/21-4-768x768.png)
![3[1]](https://spancnc.com/wp-content/uploads/2024/07/31-4-768x768.png)
![4[1]](https://spancnc.com/wp-content/uploads/2024/07/41-4-768x768.png)
Products Designed by CO2 Laser Machine
